Hand operated high pressure pump, 300 MPa (43 500 psi), complete in case
THHP 300 is a high-pressure manual hydraulic pump for a wide range of applications with oil pressures up to 300 MPa (43 500 psi) using the SKF oil injection method. It can be used directly from the housing: install the appropriate THPN fitting on the application and screw on the quick-connect fitting. Connect the hose to the fitting on the application to supply the high-pressure oil. The two-stage pump includes a 0-300 MPa (0-43 500 psi) pressure gauge, a high-pressure hose and a quick-connect fitting. The connection fittings support G1/4 and G3/4 connections.
Designation
THHP 300
Maximum pressure
300Mpa(43500 psi)
Volume per stroke 1 st stage
40cm³(2.43 in³)-below 1.63MPa(232psi)
Volume per stroke 2nd stage
0.5cm³(0.03 in³)-below 1.6MPa(232psi)
Oil reservoir capacity
1.8 litres(110 in.³) / 1.6litres( 97.6 in.³) unsable
Pressure gauge
0-300MPa(0-43500 psi)
Diameter 100mm( 4 in)
Accuracy 1% of full scale
Hose length
2.7 (78 in)
Hose connection threads
G1/ 4 female to pump
M16 Male thread with special sealing design to attach to the quick connection coupling
Maximum torque for M16 thread
40-50Nm/(29.5-36.9 ft-lb)
Main dimensions of the punmp(without hose and gauge)
574*130*200mm(22.6*5.1*7.9in)
Dimensions of the carrying case
920*318*360mm(36.2*12.5*15.0 in)
Weight of the pump
7.5kg(16.5lb)
Weight of the full carrying case
20.4kg(50lb)