The DAC type auto front wheel bearing is a double row angular contact ball bearing incorporating an integral outer ring and two separable inner rings; which is available either with seals or without seals.
The DAC type bearing is a double row angular contact ball bearing incorporationg an integral outer ring and two separable inner rings, which is available either with seals or without seals
A. Large moment stiffness
This bearing can be designed to have a large contact angle. Due to the large distance between pressure centers, this bearing is fully resistant to moments imposed on the wheel during cornering or other similar motion. Thanks to ots special internal design, stiffness is further omproved to resistmoment.
B. Large load rating
The bearing can be simultaneously resistant to axial loads in both the directions and large radial load.
C. Appropriate internal axial clearance
Since the bearing is designed to have the appropriate internal axial clearance, there is no need for pre-load adjustment, which is necessary for single rowbearing assembly.
D. Superior sealing
Sealed type bearings are mud-proof, dust-proof, and leakproof all without the use of shaft seals.
Contact: Danny Email: 005@kltbearing.com Skype: danny.zhou66 Website: http://www.kltbearing.com |